LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Parking Brake >> Parking Brake Lever >> Inspection

Parking Brake Lever: Inspection

  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in TESTER CONNECTION SPECIFIED CONDITION TABLE  .

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION TABLE

      Tester Connection Switch Connection Specified Condition
      1 - Body ground  Switch Shaft Free  Below 1 Ω 
      1 - Body ground  Switch Shaft Push  10 kΩ or higher 
      Fig 1: Identifying Parking Brake Switch
      G04047858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the value is not as specified, replace the parking brake lever.

scientia non olet · About LEMON Manuals