LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> GS 300 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Automatic Transmission) >> Floor Shift Assembly >> Inspection

Floor Shift Assembly: Inspection

WARNING: This page is about a different car, the 2006 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the park/neutral position switch connector.

      Standard resistance 

      TERMINALS RESISTANCE SPECIFICATIONS

      Shift Position Tester Connection Specified Condition
      S, "+" and "-" 3 - 7 Below 1 Ω
      Except S, "+" and "-" 10 kΩ or higher
      Fig 1: Identifying Transmission Control Switch Connectors
      G04028458Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the transmission control switch connector of shift lock control unit assembly.
    3. Measure resistance according to the value(s) in the table below when the shift lever is moved to each position.
scientia non olet · About LEMON Manuals