Data List / Active Test
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- Read the DATA LIST on the tester's screen.
Multiplex network body ECU:
ITEM NORMAL CONDITION CHARTItem Measurement Display (Range) Normal Condition Diagnostic Note LUGG OPEN SW Luggage door opener switch signal / ON or OFF ON: Luggage door opener switch is pushed
OFF: Luggage door opener switch is not pushed- Cowl side junction block ECU LH:
ITEM NORMAL CONDITION CHARTItem Measurement Display (Range) Normal Condition Diagnostic Note TRUNK KEY UNLK Luggage compartment door key unlock switch signal / ON or OFF ON: Door is unlocked
OFF: Door is locked- LUGG PUSH SW Back door opener switch signal / ON or OFF ON: Power luggage door open switch is pushed
OFF: power luggage door open switch is not push- OPEN POS SW Luggage open position switch signal / ON or OFF ON: Door is closed
OFF: Door is open- CLOSE POS SW Luggage close position switch signal / ON or OFF ON: Door is open
OFF: Door is closed- LUGG COURTSY SW Luggage door courtesy switch signal / ON or OFF ON: Door is open
OFF: Door is closed-
- PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- Perform the ACTIVE TEST according to the display on the tester.
Cowl side junction block ECU LH:
ITEM DIAGNOSTIC NOTE CHARTItem Test Details Diagnostic Note TRUNK LID OPEN Operate luggage compartment door closer motor - LUGG LIGHT Operate luggage door courtesy switch -