Front Stereo Component Speaker: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE SPEAKER HOLE COVER
1. Using a screwdriver, detach the 4 clips and remove the hole cover.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 1: Identifying Speaker Hole Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY
1. Remove the 2 bolts.
2. Disconnect the connector and remove the speaker.
  HINT:
  
  Do not touch the cone part of the speaker.
  
  Fig 2: Identifying Front Stereo Component Speaker Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002