Front Stereo Component Speaker: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL FRONT STEREO COMPONENT SPEAKER ASSEMBLY 
   1. Connect the connector.
   2. Temporarily install the speaker by aligning the positioning pins of the speaker to the instrument panel.
   3. Install the speaker with the 2 bolts.

      HINT:

      Do not touch the cone part of the speaker.

      Fig 1: Identifying Front Stereo Component Speaker Assembly

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL SPEAKER HOLE COVER 
   1. Attach the 4 clips to install the hole cover.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
4. PERFORM INITIALIZATION 
   1. Perform initialization (See INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
      Fig 2: Identifying Speaker Hole Cover

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002