Fail-Safe Chart
HINT:
The pre-collision safety system fail-safe function and details are indicated in the table below.
FAIL-SAFE CHART
| Cause | Warning message | ail-safe Operation | Conditions to return to normal condition | ||||
|---|---|---|---|---|---|---|---|
| A malfunction exists in part of pre-collision safety system | "Check PCS" to "PCS DISABLED Now" | Depending on malfunction part, pre-collision seat belt or brake assist system may stop operating(2) | Repair malfunctioning part | ||||
| Radiator grille or millimeter wave radar sensor is dirty | "PCS DISABLED Now" | Depending on dirty part, pre-collision seat belt or brake assist system may stop operating(2) | Clean radiator grille or millimeter wave radar sensor | ||||
| Pre-collision sensor cannot detect possible crash object because of bad weather, such as snow | "PCS DISABLED Now" | Depending on dirty part, pre-collision seat belt or brake assist system may stop operating(2) | Sensor can detect an object | ||||
| Overheating prevention function of seat belt control ECU operates(1) | "PCS DISABLED Now" | Pre-collision seat belts | Temperature of seat belt goes down, and seat belt control ECU becomes operative | ||||
|
|||||||