Customize Parameters
WARNING: This page is about a different car, the 2004 Lexus RX 330. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
The following items can be customized.
NOTE:
- After confirming whether the items requested by the customer are applicable or not for customization, perform customize operations.
- Be sure to record the current settings before customizing.
- When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization.
Standard:
Power back door ECU
POWER BACK DOOR ECU PARAMETERS
| DISPLAY (ITEM) | DEFAULT | CONTENTS | SETTING | ||||
|---|---|---|---|---|---|---|---|
| PBD SW OPER | 0.8s | Function that turns power back door closer switch ON when switch is pushed once or held down for 0.8 sec. | 0.8s/ON | ||||
| PBD BUZZ VOL | OFF | Function that adjusts the volume of warning buzzer that notifies power back door is operating | OFF/SMALL/LARGE | ||||
| WIRELS PBD OPER | 0.8s | Function that operates power back door when transmitter switch is pressed in specified way (1-press, 2-presses, 0.8 sec.-press or OFF(1)) | ON/TWICE ON/0.8s/OFF | ||||
| PBD ASSIST CLS | ON | Function that helps power back door closing operation | ON/OFF | ||||
| PBD ASSIST OPN(2) | OFF | Function that helps power back door opening operation | ON/OFF | ||||
HINT:
|
|||||||
When the back door is fully closed, pulling the back door opener switch (outside handle switch) activates the power back door system to automatically open the back door after the it is unlatched.