LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2005 >> GS 300 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Parking Brake Pedal >> Removal

Parking Brake Pedal: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE, END PAD, NO. 1 UNDER COVER, NO. 1 SAFETY PAD AND NO. 7 HEATER TO REGISTER DUCT (See  INSTRUMENT PANEL  )  .
  2. REMOVE PARKING BRAKE PEDAL ASSEMBLY 
    1. Disconnect the parking brake switch connector.
    2. Remove the 2 bolts and disconnect the parking brake release lever from the safety pad.

      Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf) 

    3. Remove the lock nut and the adjusting nut from the parking brake wire.
    4. Remove the parking brake wire.
    5. Remove the 2 bolts, 2 nuts and parking brake pedal assembly.

      Torque: 13 N.m (130 kgf.cm, 9 ft.lbf) 

  3. REMOVE PARKING BRAKE SWITCH 

    Remove the screw and parking brake switch from the parking brake pedal assembly.

scientia non olet · About LEMON Manuals