LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood (Exterior Body Panels) >> Hood Support Rod >> Disposal

Hood Support Rod: Disposal

  1. DISPOSE OF HOOD SUPPORT ROD 
    1. Horizontally fix the stay on a vise, with the piston-rod pulled out.
    2. Wearing safety glasses, gradually cut a part between A and B as shown in the illustration using a metal saw to gradually release the gas.
      NOTE: Although the gas inside the stay is colorless, odorless and harmless, there is a possibility that metal debris from could scatter. Therefore, cover it with clothes or something similar.
      Fig 1: Disposing Hood Support Rod (By Cutting Hole In Shaded Area)
      G03010656Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals