How To Proceed With Troubleshooting

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS (See  CUSTOMER PROBLEM ANALYSIS CHECK  ) 
3. CHECK AND CLEAR DTCs (See  PRE-CHECK  ) 
4. PROBLEM SYMPTOM CONFIRMATION 
   1. SYMPTOM DOES NOT OCCUR (Go to step 5) 
   2. SYMPTOM OCCURS (Go to step   6 ) 
5. SYMPTOM SIMULATION (See  HOW TO PROCEED WITH TROUBLESHOOTING  ) 
6. DTC CHECK (See  PRE-CHECK  ) 
   1. NORMAL CODE (Go to step 7) 
   2. MALFUNCTION CODE (Go to step   8 ) 
7. PROBLEM SYMPTOMS TABLE (See  PROBLEM SYMPTOMS TABLE  ) 
8. DTC CHART (See  DIAGNOSTIC TROUBLE CODE CHART  ) 
9. CIRCUIT INSPECTION (See  DTC C1713/13 RIGHT REAR HEIGHT CONTROL SENSOR CIRCUIT, DTC C1714/14 LEFT REAR HEIGHT CONTROL SENSOR CIRCUIT   or  TS TERMINAL CIRCUIT  ) 
10. IDENTIFICATION OF PROBLEM 
11. REPAIR 
12. CONFIRMATION TEST 

    END 

HINT:

Step 3, 6, 9, 12:

Diagnostic steps permitting the use of the hand-held tester.