Circuit Description
This sensor detects deceleration on the vehicle. The sensor signal is used in ABS & BA & TRAC & VSC control. If the sensor functions abnormally, the ABS warning light comes on.
DIAGNOSTIC TROUBLE CODE
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| C1232/32 | While vehicle speed becomes 0 km/h (0 mph) from 30 km/h (18 mph), and the condition that GL1 and GL2 signals of ECU terminals did not change 40 mV or less continued in a sequence 16 times. |
|
| C1243/43 | ||
| C1244/44 | Either of the following 1., 2., 3. or 4. is detected:
|
|
| C1245/45 | At the vehicle speed of 30 km/h (18 mph) or more, and the condition that the difference between acceleration and deceleration values of computation from deceleration sensor and vehicle speed becomes more than 0.35 G continues for 60 sec. or more. |