Circuit Description
The skid control ECU receives engine revolution speed signals (NE signals) from the ECM.
DIAGNOSTIC TROUBLE CODE
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| C1224/44 | When any of the following 1. through 2. is detected:
|
|
The skid control ECU receives engine revolution speed signals (NE signals) from the ECM.
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| C1224/44 | When any of the following 1. through 2. is detected:
|
|