LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2003 >> RX 300 FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Component Tests >> Seat Belt Warning Light

Seat Belt Warning Light

  1. Disconnect the connector from the buckle switch and ground terminal on the wiring harness side connector. See CONNECTOR IDENTIFICATION .
  2. Turn the ignition switch ON and check that the warning light lights up.
  3. If the warning light does not light up, check the bulb circuit. See BULB CIRCUIT  under CIRCUIT TESTS.
scientia non olet · About LEMON Manuals