LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2003 >> RX 300 AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls (Removal & Installation) >> Sensors & Switches >> Park/Neutral Position (PNP) Switch >> Removal (RX300)

Removal (RX300)

  1. The PNP switch is located on side of transaxle. Remove splash shield from underneath engine. Disconnect electrical connector at PNP switch. Remove nut from shift control cable and separate cable from shift control lever.
  2. Remove nut, washer and shift control lever. Bend tab upward on lock plate, away from PNP switch retaining nut. Remove PNP switch retaining nut and lock plate. Remove PNP switch retaining bolts and PNP switch.
scientia non olet · About LEMON Manuals