LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2003 >> RX 300 AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brakes Mechanical >> Removal & Installation >> Parking Brake Shoes >> Installation

Parking Brake Shoes: Installation

  1. Install parking brake shoe lever with new "C" clip.
  2. To complete installation, reverse removal procedure. Apply high temperature grease to adjuster and shoe contact points. See Figure.
  3. Install shoe strut with spring facing forward.
  4. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS .
  5. Adjust parking brake shoe clearance. See PARKING BRAKE SHOE CLEARANCE  under ADJUSTMENTS.
  6. Install rear wheel and tighten lug nuts to specification. See TORQUE SPECIFICATIONS .
  7. Seat parking brake shoes and disc. See SEATING PARKING BRAKE SHOES & DISC  under ADJUSTMENTS.
  8. Check and adjust parking brake pedal. See PARKING BRAKE  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals