Tilt Up Operation

When the moon roof is fully closed (limit SW No. 1 off, limit SW No. 2 on), and the moon roof control SW is kept pressed to UP position for approximately 0.3 seconds or longer, a signal is input from TERMINAL 6 of the moon roof control SW to TERMINAL 10 of the moon roof control ECU. This activates the relay and rotates the motor to tilt up the moon roof automatically. If the pulse signal is input from the HALL IC for 0.5 seconds or longer, it determines that the moon roof is fully tilted up, and stops the motor. If other operation SW or the tilt up SW is operated while the moon roof is being tilted up, the relay is activated to stop the moon roof operation. In addition, when the moon roof is opened, the tilt up operation does not function.