DRL No. 2 & 4 Relay
Inspect the DRL No. 2 and 4 relay continuity. See CONNECTOR IDENTIFICATION . See INSPECTING DRL NO. 2 & 4 RELAY CONTINUITY table. If continuity is not as specified, replace the relay.
INSPECTING DRL NO. 2 & 4 RELAY CONTINUITY
| Condition | Tester Connection | Specified Condition |
|---|---|---|
| Constant | 3 - 4 | Continuity |
| Apply B+ Between Terminals 3 & 4 | 1 - 2 | Continuity |