Active Test List

HINT:

Perform the ACTIVE TEST using the hand-held tester to operate the relays and other system components the relay and so on to operate without removing any parts. Performing the ACTIVE TEST is the first step of troubleshooting is one of the methods to shorten labor time. It is possible to display the DATA LIST during the ACTIVE TEST.

1. Connect the hand-held tester to DLC3.
2. Turn the ignition switch ON.
3. Following the display on tester, perform the "ACTIVE TEST".
   ACTIVE TEST LIST
   
   

   Item	Vehicle Condition/Test Details	Diagnostic Note
   RR HEIGHT	Turn height control switch/UP or DOWN	-
   DAMPER FR	Changes damper step/min.: 1 step, max.: 16 step	Shock absorber hardens as damper step increases
   DAMPER FL	Changes damper step/min.: 1 step, max.: 16 step	Shock absorber hardens as damper step increases
   DAMPER RR	Changes damper step/min.: 1 step, max.: 16 step	Shock absorber hardens as damper step increases
   DAMPER RL	Changes damper step/min.: 1 step, max.: 16 step	Shock absorber hardens as damper step increases
   MOTOR RELAY	Turn AIR SUS relay/ON or OFF	Operation of motor can be heard
   LEVEL SOL REAR	Turn leveling solenoid valve/ON or OFF	Operation of solenoid (clicking sound) can be heard
   GATE SOL REAR	Turn gate solenoid valve/ON or OFF	Operation of solenoid (clicking sound) can be heard
   LOW PRS TNK SOL	Turn tank solenoid valve/ON or OFF	Operation of solenoid (clicking sound) can be heard