Circuit Description
This relay supplies power to each ABS solenoid. After the ignition switch is turned ON, if the initial check is OK, the relay goes on.
DTC TROUBLE DETECTION
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| C0278/11 | Conditions 1. and 2. continue for 0.2 sec. or more:
|
|
| C0279/12 | Immediately after ECU terminal IG1 becomes ON, and solenoid relay is OFF, however, when the condition that the solenoid relay due to the contact point is ON continues for 0.2 sec. or more. |