Cooling Fan Relay No. 3
- Disconnect negative battery cable. Remove cooling fan relay No. 3 from fuse/relay box. See COMPONENT LOCATIONS . Using an ohmmeter, check for continuity between relay terminals No. 1 and 2. See Fig 1. If no continuity exists, replace relay. Check that no continuity exists between relay terminals No. 3 and 5. If continuity exists, replace relay.
- To check relay operation, connect positive battery voltage to terminal No. 1. Connect ground to terminal No. 2. Check for continuity between relay terminals No. 3 and 5. If no continuity exists, replace relay. Reinstall cooling fan relay No. 3.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002