LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> IS 300 Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Vacuum Brake Booster >> Removal (RX 300)

Removal (RX 300)

  1. Remove master cylinder. See MASTER CYLINDER .
  2. Using pliers, slide clip and disconnect vacuum hose from brake booster and remove clip. See Fig 1.
  3. Disconnect brake lines from clamp and remove return spring.
  4. Remove clip and clevis pin.
  5. Remove nuts and clevis. Pull out brake booster and gasket.
Fig 1: Identifying Brake Booster Components (RX 300)
G00185225Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals