LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> IS 300 Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Parking Brake >> Inspection (LS 430)

Inspection (LS 430)

  1. Inspect the disassembled parts for wear, rust or damage.
  2. Measure parking shoe lining thickness. If lining thickness is at minimum thickness or less, or if there is severe and uneven wear, replace brake shoe. See PARKING BRAKE SPECIFICATIONS  table.
  3. Using a brake drum gauge or equivalent, measure parking brake drum inside diameter. Replace disc if inside diameter is at maximum or more. See PARKING BRAKE SPECIFICATIONS  table. Replace disc or grind it with a lathe if disc is scored or worn unevenly.
  4. Apply chalk to inside surface of disc, then grind down brake shoe lining to fit. If contact between disc and brake shoe lining is improper, repair it using a brake shoe grinder or replace brake shoe assembly.
scientia non olet · About LEMON Manuals