LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> IS 300 Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Master Cylinder >> Removal (ES 300)

Removal (ES 300)

  1. Remove air cleaner assembly and drain brake fluid.
  2. Disconnect fluid level warning switch connector.
  3. Disconnect brakelines from master cylinder.
  4. Remove nuts, pull out 2-way and brake master cylinder sub-assembly.
  5. Remove master cylinder reservoir filler cap assembly.
  6. Remove master cylinder reservoir strainer.
  7. Remove screw and pull out master cylinder reservoir sub-assembly.
  8. Remove master cylinder reservoir grommets.
scientia non olet · About LEMON Manuals