LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> IS 300 Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Component Tests >> Seat Belt Warning Light

Seat Belt Warning Light

  1. Disconnect the connector from the buckle switch.
  2. Connect the terminal on the wiring harness side of the buckle switch connector. See CONNECTOR IDENTIFICATION .
  3. Turn the ignition switch ON and check that the warning light lights up. If the warning light does not light up, inspect the bulb or wiring harness.
scientia non olet · About LEMON Manuals