Removal & Installation (Land Cruiser, LX 470, Sequoia & Tundra V8)

1. Starter is located underneath intake manifold. See Fig 1. Disconnect negative battery cable. Remove cover from top of engine. Remove air cleaner intake hose. Disconnect accelerator cable. Remove intake manifold. See CYLINDER HEAD & MANIFOLDS in 4.7L article in ENGINES.
2. Remove starter wires and remove starter. To install, reverse removal procedure. Tighten starter bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Exploded View Of Intake Manifold & Starter Components (Land Cruiser& Tundra 4.7L)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002