LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> SC 400 >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Driveshafts & Universal Joints >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Center Exhaust Pipe-To-Front Exhaust Pipe Nut (Except RX300) 32 (43)
Center Exhaust Pipe-To-Rear Exhaust Pipe Nut (Except RX300) 14 (19)
Center Support Bearing Mounting Bolts
Except SC300 27 (37)
SC300 36 (49)
Center Support Bearing & Universal Flange Nut (RX300 & SC300) (1)
Drive Shaft-To-Intermediate Shaft Bolts (SC300) 54 (73)
Drive Shaft-To-Flange Bolts (RX300) 54 (73)
Front & Rear Center Bearing Mounting Bolts (RX300) 27 (37)
Front Exhaust Pipe-To-Exhaust Manifold Nut (Except RX300) 32 (43)
Oxygen Sensor
Except RX300 & SC300 34 (46)
SC300 33 (45)
Rubber Flexible Coupling-To-Flange Nut
Except LS400 & RX300 (2) 59 (80)
LS400 (3) 53 (72)
INCH Lbs. (N.m) 
Front & Rear Crossmember Brace Bolts (Except RX300) 108 (12)
Heat Shield Bolts (Except RX300) 48 (5.4)
(1) Tighten nut to 134 ft. lbs. (182 N.m) to seat bearing. Loosen nut and retighten to 51 ft. lbs. (69 N.m).
(2) Install bolts from drive shaft assembly side.
(3) Install bolts from differential side and transmission side.