LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> SC 400 >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Removal & Installation >> Lower Suspension Arm >> Removal (GS300 & GS400)

Removal (GS300 & GS400)

  1. Raise and support vehicle. Remove wheels. Remove fender apron seal. Remove 2 bolts, nuts and No. 1 lower suspension arm.
  2. On models with Halogen type headlight, remove bolt, nut and disconnect stabilizer bar link from No. 2 suspension arm. On models with HID type headlight, remove bolt and nut and disconnect stabilizer bar link and height control link from No. 2 suspension arm. On all models, remove bolt, nut and disconnect shock absorber from No. 2 suspension arm. See Figure.
  3. Place reference marks on adjuster cam and No. 2 lower suspension arm. Remove nut, adjusting cam No. 2 and adjusting cam No. 1. Remove bolt, nut, washer and No. 2 lower suspension arm.
scientia non olet · About LEMON Manuals