LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> SC 400 >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Air Conditioning Compressor Servicing >> SANDEN 7-Cylinder >> Shaft Seal >> Removal (Jaguar)

Removal (Jaguar)

  1. Using 3 bolts, attach Puller (JD166-1) to clutch plate. While holding clutch plate with puller, remove shaft nut. Install puller bolt in center of puller, and tighten bolt to remove clutch plate.
  2. Remove Woodruff key, felt seal, and seal seat snap ring. Engage Seal Seat Remover/Installer (JD167) to seal seat, and remove seal seat. Engage Seal Remover/Installer (JD168) to shaft seal, and remove shaft seal.
scientia non olet · About LEMON Manuals