LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> SC 400 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling Fan >> Electric Cooling Fans >> Component Tests >> Cooling Fan Relays No. 1, 2 & 3 >> RX300

Cooling Fan Relays No. 1, 2 & 3: RX300

  1. Relays are marked FAN NO. 1, FAN NO. 2 and FAN NO. 3. On all relays, ensure continuity is present between relay terminals No. 3 and 5. For relays No. 1 and 3, ensure there is continuity between relay terminals No. 1 and 2. For relay No. 2, ensure there is no continuity between terminals No. 1 and 2. If continuity measurements are not to specification, replace cooling fan relay. If continuity exists as described, go to next step.
  2. For relay No. 1, apply battery voltage across relay terminals No. 3 and 5. There should be continuity between terminals No. 1 and 2.
  3. For relay No. 2, apply battery voltage across relay terminals No. 3 and 5. There should be no continuity between terminals No. 2 and 4.
  4. For relay No. 3, apply battery voltage across relay terminals No. 3 and 5. There should be continuity between terminals No. 1 and 2.
scientia non olet · About LEMON Manuals