LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> SC 400 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Rear Brake Rotor >> Installation

Rear Brake Rotor: Installation

  1. Place rotor on rear hub. Install caliper torque plate, and tighten bolts to specification. See TORQUE SPECIFICATIONS . Remove some brake fluid from reservoir. Compress caliper pistons.
  2. Install caliper over brake pad assembly (onto sliding pins). Hold sliding pins and tighten bolts. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals