LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2000 >> SC 400 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Remove air cleaner cover with air cleaner housing (if equipped). On RX300, disconnect reservoir assembly from bracket. On all models, disconnect fluid level warning switch connector. Using syringe, remove brake fluid from reservoir.
  2. Disconnect brakelines from master cylinder. Remove master cylinder and gasket.
scientia non olet · About LEMON Manuals