Parking Brake: Es300
- With a force of 66 lbs. (30 kg), push down on parking brake pedal while counting clicks. If 3-6 clicks are not counted, parking brake requires adjustment.
- Remove console upper panel and console box. Ensure parking brake pedal is released. Hold screw end of No. 4 cable. DO NOT rotate. Loosen lock nut. Hold parking brake cable, and turn adjusting hexagon until pedal travel is correct.
- Holding adjusting hexagon, tighten lock nut to 48 INCH lbs. (5.4 N.m). Install console box and console upper panel.