Test No. 19: Cruise Main Indicator Abnormal Operation Or Does Not Illuminate
- Disconnect instrument cluster harness connector "C". Turn ignition on. Ground instrument cluster cavity "C", terminal No. 2 (Yellow/Red wire). See WIRING DIAGRAMS . If light illuminates, go to next step. If light does not illuminate, check bulb. Replace if necessary and retest. If bulb is okay, replace circuit plate and retest.
- Check for continuity in circuit between instrument cluster harness connector "C", terminal No. 2 and cruise control ECM. If continuity is not present, repair open circuit. If continuity is present, check cruise control ECU. See appropriate CRUISE CONTROL SYSTEMS article. Repair as necessary.