Circuit Description
ABS solenoid turns on when signal is received from ABS/TRAC/VSC ECU. Solenoid controls fluid pressure acting on brake calipers. DTC is set when system is operating and ABS/TRAC/VSC ECU detects an open or short circuit in ABS solenoid circuit for .05 seconds or more. If a fault occurs in ABS solenoid circuit, ABS/TRAC/VSC ECU performs a fail safe function, turning off current to ABS solenoid relay and prohibiting ABS, TRAC and VSC. Possible causes are:
- ABS/TRAC/VSC Actuator
- Open Or Short Circuit
- ABS/TRAC/VSC ECU