Brake Pedal Height
- Brake pedal height is measured from face of pedal pad to asphalt sheet under carpet. To adjust clearance, loosen stoplight switch and lock nut on brake push rod. See Fig 1.
- Adjust pedal height by turning push rod. See BRAKE PEDAL SPECIFICATIONS table for correct specification. After setting pedal height, tighten lock nut on push rod. Adjust stoplight switch and tighten switch lock nut. See STOPLIGHT SWITCH .
BRAKE PEDAL SPECIFICATIONS
| Application | Free Play In. (mm) | Pedal Height In. (mm) |
|---|---|---|
| LX 450/Land Cruiser | .12-.24 | 6.6-7.0 |
| (3.0-6.0) | (168-178) | |