LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 1995 >> SC 300 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Diagnosis - A-340 (W/O OBD-II)) >> Self-Diagnostic System >> Clearing Trouble Codes

Clearing Trouble Codes

WARNING: This page is about a different variant/trim than selected.

Once repairs have been performed, trouble codes must be cleared from ECT ECU memory. Remove EFI 15-amp fuse for 10 seconds to clear memory in ECT ECU. EFI fuse is in fuse/relay box, located in engine compartment. Fuse may need to be removed for more than 10 seconds in cold ambient temperatures. Reinstall fuse.

NOTE: Trouble codes may also be cleared by disconnecting negative battery cable but memory for electronic components will also be canceled.
scientia non olet · About LEMON Manuals