Side Airbag (G2312406): Installation

The following step(s) applies to: 

All vehicles 

1. CAUTION: Make sure that the component is installed to the position noted on removal.

   Install the side airbag with the fabric bag within the backrest foam assembly.

2. Install the front row seat backrest foam assembly.

   The following step(s) applies to: 

   Vehicles with climate controlled seats 

3. Secure the 2 clips.

   The following step(s) applies to: 

   Vehicles with heated front row seats 

4. Connect the electrical connector.

   The following step(s) applies to: 

   All vehicles 

5. • Install and tighten the 2 nuts.

     Torque  : 7 Nm 

   • Connect the side airbag electrical connector.
6. Install the front row seat backrest cover.

   Refer to: FRONT ROW SEAT BACKREST COVER - VEHICLES WITH: CLIMATE CONTROLLED SEATS .

7. Connect the startup battery ground cable.

   Refer to: 12V SYSTEM DISCONNECT .