Fuel Rail (G2110425): Removal
CAUTION:
Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Always follow the fuel system health and safety precautions when doing any repairs to the fuel system.
Refer to: PETROL AND PETROL-ETHANOL FUEL SYSTEMS HEALTH AND SAFETY PRECAUTIONS .
- Release the fuel system pressure.
Refer to: FUEL SYSTEM PRESSURE RELEASE .
- Disconnect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT .
- Clean all the fuel line unions and the surrounding area before working on the fuel system.
Refer to: FUEL INJECTION COMPONENT CLEANING .
- Remove the fuel injectors.
Refer to: FUEL INJECTORS .
Remove the fuel rail pressure sensor.