Instrument Panel Cluster - Conventional Display

The IPC  conventional display comprises of 2 analog gauges for the speedometer and tachometer. A 7 inch Thin Film Transistor (TFT) message center provides driver information.

The speedometer is located on the left of the IPC  and the tachometer is located on the right of the IPC  . The IPC  is available in 2 market variants:

• Major scale miles per hour (mph)
• Major scale kilometers per hour (km/h).

The tachometer in all markets has a maximum of 7, 000 Revolutions Per Minute (RPM).

The IPC  features a number of warning indicators. The warning indicators illuminate in 1 of 4 colors which indicate at the level of importance of the warning as follows:

• Red - Warning
• Amber - Caution
• Green - System operative
• Blue - Headlamp high beam ON.

The driver can set up a number of features and find out essential information about the vehicle in the IPC  display menu. The IPC  display menu consists of the following sections:

• Driver assistance
• Trip computer information
• Display
• HUD 
• Vehicle settings
• Vehicle information.

The IPC  menu can be accessed by using the left steering wheel switch located on the left of the steering wheel.

For additional information, Refer to: INFORMATION AND MESSAGE CENTER .