Instrument Panel Cluster - Virtual Display

The IPC  receives a permanent power supply from the startup battery through the PJB. A hardwired LED security system status indicator is connected to the IPC  from the BCM  /GWM  .

The Infotainment Master Controller (IMC) and the HUD  are connected to the IPC  by the following:

• Automotive Pixel Link 2 (APIX2) connection
• HS CAN  comfort systems bus.

Other vehicle sensors are connected to the BCM  /GWM  which processes the signals from the sensors. The processed signals are delivered to the IPC  on the HS CAN  chassis and comfort systems buses. The IPC  communicates with the vehicle infotainment system on the HS CAN  comfort systems bus.

For additional information, Refer to: INFORMATION AND MESSAGE CENTER .