- Head up display image shows a secondary image - HUD image does not look sharp
|
- Protective film still covering HUD lens
- Incorrect seat and HUD display position
- Windshield damage in HUD projection area
- HUD windshield has not been tested by the glass manufacturer
- Non HUD windshield installed in the vehicle
|
- Check and remove the protective film from the HUD lens as required
- GO to PINPOINT TEST A . HUD Image distorted - Seating position
- GO to PINPOINT TEST A . HUD Image distorted - windshield check
- GO to PINPOINT TEST A . HUD Image distorted - Test Result Check
- GO to PINPOINT TEST A . HUD Image distorted - Logo and trademark check
|
- Head up display projected image brightness does not adjust
|
- Windshield covered in dirt/dust
- Incorrect rain/light sensor installed
|
- Clean the windshield
- GO to PINPOINT TEST B . HUD Brightness - Rain/Light Sensor Check
|
- Head up display does not project image
|
- Item covering HUD projector unit
- Head up display internal failure
|
- Remove any items covering the projector unit
- GO to PINPOINT TEST C . HUD - Inoperative
|
- Head up display navigation display not operational
|
- CCF or system settings require adjustment
- APIX2 circuits disconnected
- Head up display internal failure
|
|
- Head up display traffic sign recognition display not operational
|
- CCF or system settings require adjustment
- Head up display internal failure
|
|