Differential Rear Bush (G1775378): Installation
-
CAUTION: Only use the specified special tool.
Using the special tool, compress the bushing.
Special Tool(s): 205-860-09 , 205-861-05 , LR-121
-
CAUTION: Make sure the correct special tool is used to install the bushings to the correct depth.NOTE: Make sure that these components are installed to the noted removal position.
Using the special tool, install the bushing, making sure the slot on the RH bushing is positioned vertically and the slot on the LH bushing is positioned horizontally.
Special Tool(s): LR-121 , 205-861-04 , 205-861-03 , 205-861-05
- Install the rear differential.
Refer to: REAR DRIVE UNIT .