Differential Front Bush (G1775377): Removal
NOTE:
- This procedure contains illustrations for left side components, right side components are similar.
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Raise and support the vehicle on a suitable 2 post lift.
- Remove the rear differential.
Refer to: REAR DRIVE UNIT .
-
NOTE: Note the orientation of the bushes prior to removal.
- Install the special tools to the rear differential front bush.
Special Tool(s): 205-860-01 , 205-860-02
- Install the special tool at point A.
Special Tool(s): 204-598
- Install a suitable nut to the threaded bar.
- Using the special tools remove the rear differential front bush.
- Install the special tools to the rear differential front bush.