AQUASPORTS Carrier (G2287041): Installation
Unlock and remove the roof cross bar side covers.
- Using the supplied key unlock the roof cross bar side covers.
- slide the side covers outwards.
- Move the roof cross bar side covers aside as illustrated.
Slide out both of the finishers from the roof cross bars.
Cut the roof cross bar finishers to length.
- Using a suitable cutting tool, cut the roof cross bar finishers using the measurements illustrated.
- Discard the 2 smallest 12 mm sections of the roof cross bar finisher.
Install the roof cross bar finishers into the roof cross bars.
- Insert the lengths of roof cross bar finisher and the 2 fixings (G) into the roof cross bar as illustrated.
- Repeat for the second roof cross bar.
- Install the roof cross bar side covers and lock.
Assemble the aquasports carrier as illustrated.
Lower the aquasports carrier onto the roof cross bar.
- Repeat steps 4 to 6 to install the aquasports carrier to the other roof cross bar.
Using the straps supplied, secure the load.
Folding the aquasports carrier.
- Loosen the fixings.
- Fold down the aquasports carrier.
- Tighten the fixings.
-
WARNING: Do not exceed 130 km/h or 80 mph.