Rear Proximity Camera (G2308727): Installation

CAUTION: This step must be completed if a new rear view camera is installed.

Install the rear view camera sealing kit.

Refer to: REAR VIEW CAMERA WATER INGRESS SEALING .
Install the rear proximity camera to the bracket.
- Install the bracket.
- Install the screw.
- Connect the 4 electrical connectors.
- Connect the washer jet hose.
- Secure the wiring harness with the 2 clips.
- Install the tailgate moulding carrier.
- Install the 4 bolts.
  Torque : 10 Nm
Install the tailgate moulding.
Refer to: TAILGATE MOULDING .
Install the 2 nuts.
Install the tailgate trim panel.
Refer to: TAILGATE TRIM PANEL .