Symptom Chart

SYMPTOM	POSSIBLE CAUSE	ACTION
Camera image slow to react	System operation within specification	NOTE: After selecting reverse, it may take up to 2 seconds for the image to be displayed No further action necessary
Blank screen	Camera not functioning	GO to PINPOINT TEST A .
Camera system unavailable	Video in signal absent	GO to PINPOINT TEST B .
No tracking lines	Missing/invalid reverse gear signal Image processing module B (IPMB) flexray fault Image Processing module B (IPMB) Controller Area Network (CAN) fault	Using the Jaguar Land Rover approved diagnostic equipment, check the Image Processing module B (IPMB) for related DTC s and refer to the relevant DTC index GO to PINPOINT TEST C .
Frozen tracking lines	Image Processing module B (IPMB) flexray fault Image Processing module B (IPMB) CAN fault	GO to PINPOINT TEST D .