LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2023 >> Range Rover Evoque SE >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seating -- Range Rover EVOQUE/L551 >> Seating >> Removal And Installation >> Front Row Seat Cushion Cover (G2305903) >> Installation

Front Row Seat Cushion Cover (G2305903): Installation

  1. NOTE:
    • Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap as illustrated.
    • Make sure that new hog rings are installed.
    G14458336Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  2. G14458372Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the front row seat cushion cover.
    • Install the 20 new hog rings in the sequence shown.

      General Equipment: hog ring plier 

      Renew Part: Hog rings Quantity: 20 . 

  3. Secure the carpet retainer.
  4. Install the front row seat cushion assembly.
  5. Secure the 3 retainers at the front of the cushion.
  6. Secure the 3 retainers at the back of the cushion.
  7. Connect the front row seat heater element electrical connector.
  8. Secure the 2 front row seat backrest cover retainers.
  9. NOTE: If equipped.

    Install the front row seat backrest trim panel.

    • Connect the front row seat switchpack electrical connector.
    • Install the front row seat outer valance.
  11. Install the front row seat.

    Refer to: FRONT ROW SEAT .

  12. Connect the startup battery ground cable.

    Refer to: SPECIFICATIONS .

scientia non olet · About LEMON Manuals