Front Row Seat Backrest Blower (G2303727): Installation
- Install the front row seat backrest blower.
- Secure the 2 clips.
-
- Install and tighten the 3 bolts.
Torque : 1 Nm
- Connect the electrical connector.
- Install and tighten the 3 bolts.
- Install the front row seat backrest trim panel.
-
- Install the front row seat inner valance.
- Install and tighten the 2 bolts.
Torque
M6: 6 Nm
M5: 3.2 Nm
- Install the front row seat.
Refer to: FRONT ROW SEAT .
- Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .