Second Row Seats

Dependent on vehicle specification the following options are available for the second row rear seats:

• Heated seats
• Climate seats
• Recline function
• Manual fold or power fold.

Operation of the temperature settings for heated second row seats is controlled by the following:

• The rear seat heater switches at the rear of the floor console.
• The 'Climate/Rear Climate/Rear Seats' menu of the Touchscreen (TS).

ISOFIX fastening points are attached to the second row seat frame to provide secure fastening for compatible child seats in the rear seats.

The second row seats have a 60/40 split which allows for the seating of 3 people. The whole seat or partial seat can be lowered for additional loadspace capacity.

• Dependent on vehicle specification and trim level, the following features are available:
• Second row seat armrest
• Heated second row seats
• Electrically operated backrest recline.

On vehicles with heated second row seats, heater elements are incorporated into the seat cushions and the backrests. Operation of the temperature settings for heated rear seats are controlled through the seat heater switch or the Rear Integrated Control Panel (RICP). The rear seat heater switch or the RICP is located on the rear of the floor console.

Dependent on vehicle specifications or optionally, a rear seat backrest recline system can be installed. This allows the passenger to move the angle of the backrest by 7° on either the 40% right seat, or the 40/20% left seat.

The central 20% section can be released using a release latch on the top of the center seat.