Remote Function Actuator
NOTE:
Make sure ALL keys are available and placed on the center console within the vehicle. This must be done prior to running the configure new Remote Function Actuator (RFA).
| ITEM | DESCRIPTION |
|---|---|
| A | Vehicles with passive start system. |
| B | Vehicles with Passive Entry Passive Start (PEPS) system |
| 1 | Remote Function Actuator (RFA) |
The Remote Function Actuator (RFA) is located in the loadspace, above the rear left wheel arch. The RFA controls signal transmissions to and from the smart key and provides authorization to allow the vehicle to be entered and started. A permanent power feed is supplied to the RFA by the Passenger Junction Box (PJB). The RFA has a High Speed (HS) Controller Area Network (CAN) body systems bus connection to the Body Control Module/Gateway Module (BCM/GWM) for authorizing vehicle unlocking and starting.
| PART NUMBER SUFFIX | VEHICLE SPECIFICATION |
|---|---|
| A# | Passive Start System Only |
| B# | Passive Entry Passive Start (PEPS) System |